S2_brotherE.book Page 15 Thursday, February 13, 2003 11:03 AM

aSlide the sewing speed controller to the right (so that the speed will be fast).

1

1Sewing speed controller

bPress (start/stop button) once.

1

1Start/stop button

XThe bobbin starts spinning and the thread is wound around the bobbin.

XThe bobbin spins slowly when it is full.

cWhen the bobbin begins spinning slowly,

press (start/stop button) once.

X The sewing machine stops.

dUse scissors to cut the end of the thread wound around the bobbin.

eSlide the bobbin winder shaft to the left.

1

fRemove the bobbin from the shaft.

gRemove the spool cap and spool.

hSwing down the bobbin thread spool pin, close the bobbin winder cover, and then slide the sewing speed controller back to its original position.

Memo

When the sewing machine is started or the balance wheel is turned after winding the thread around the bobbin, the machine will make a clicking sound; this is not a malfunction.

Winding/Installing the Bobbin 15

Page 21
Image 21
Brother CS 80 manual BPress start/stop button once, Sewing machine stops