Brother CS 80 manual Install the twin needle in the same way

S2_brotherE.book Page 33 Thursday, February 13, 2003 11:03 AM

6While holding the needle with your left hand, use the screwdriver to tighten the needle clamp screw.

Install the twin needle in the same way.

CAUTION

●Be sure to insert the needle until it touches the needle stopper and securely tighten the needle clamp screw with the screwdriver, otherwise the needle may break or damage may result.

■Using the needle-changing tool

Use the enclosed needle-changing tool to replace the needle as described below.

1

1Pass the needle through the hole in the needle-changing tool.

2Lift up the needle-changing tool so that the fork hooks onto the needle clamp screw.

3Using the screwdriver, loosen the needle clamp screw.

Replacing the Needle 33