S2_brotherE.book Page 34 Thursday, February 13, 2003 11:03 AM

GETTING READY ————————————————————————————————————————————————————————

4Lower the needle-changing tool.

XThe needle can be removed from the needle bar.

5Insert the new needle into the hole in the needle-changing tool.

Insert the needle with the flat side of the needle toward the rear of the machine.

7Insert the needle until it touches the needle stopper, and then use the screwdriver to tighten the needle clamp screw.

XThe needle is installed.

8Lowerneedle.the needle-changing tool off of the

6Lift up the needle-changing tool so that the fork hooks onto the needle clamp screw.

34

Page 40
Image 40
Brother CS 80 manual 4Lower the needle-changing tool, Needle can be removed from the needle bar, Needle is installed