S2_brotherE.book Page 36 Thursday, February 13, 2003 11:03 AM

GETTING READY ————————————————————————————————————————————————————————

4Press the black button at the back of the presser foot holder.

1

2

1Black button

2Presser foot holder

XThe presser foot holder releases the presser foot.

5Place a different presser foot below the holder so that the presser foot pin is aligned with the notch in the holder.

Position the presser foot so the letter indicating the presser foot type (A, G, I, J, M, N or R) is positioned to be read.

1

23

1Presser foot holder

2 Notch

3 Pin

6Slowly lower the presser foot lever so that the presser foot pin snaps into the notch in the presser foot holder.

7Raise the presser foot lever to check that the presser foot is securely attached.

Note

For details on the presser foot that should be used with the selected stitch, refer to “ Stitch Settings” (page 96).

1

1Presser foot lever

XThe presser foot is attached.

36

Page 42
Image 42
Brother CS 80 manual Presser foot holder releases the presser foot, Presser foot is attached