S2_brotherE.book Page 24 Thursday, February 13, 2003 11:03 AM

GETTING READY ————————————————————————————————————————————————————————

5Close the thread cassette compartment cover.

XNow that the upper threading and the lower threading are finished, you are ready to begin sewing.

Note

When inserting the thread cassette into its compartment, slowly press it down.

If the sewing machine could not be threaded, try performing the procedure again starting from loading the spool of thread into the thread cassette.

Using the extra spool pin

When using spools with a size that cannot be loaded into the thread cassette, use the enclosed extra spool pin.

1Placepin. the spool of thread onto the extra spool

1

2

1Extra spod pin

2 Spool

2Slide the spool cap for the size of the spool onto the spool pin.

1

1Spool cap

For more details, refer to “ About the spool of thread” (page 18).

3Insert the tabs on the extra spool pin into the holes on the top of the thread cassette.

24

Page 30
Image 30
Brother CS 80 manual Using the extra spool pin, 5Close the thread cassette compartment cover