d Turn the green knob on the protective yellow cap clockwise until it clicks to release the vacuum seal, then remove the cap (1).

Troubleshooting and Routine Maintenance

f Gently push in the ink cartridge until it clicks, and then close the ink cartridge cover.

1

e Each color has its own correct position. Insert the ink cartridge in the direction of the arrow on the label.

g The machine will automatically reset the ink dot counter.

Note

• If you replaced an ink cartridge, for

B

example Black, the LCD may ask you to

verify that it was a brand new one

 

(Did You Change Blck?). For each

 

new cartridge you installed, press a (Yes)

 

to automatically reset the ink dot counter

 

for that color. If the ink cartridge you

 

installed is not a brand new one, be sure

 

to press b (No).

 

•If the LCD shows No Cartridge or Cannot Detect after you install the ink cartridge, check that the ink cartridges are installed properly.

CAUTION

If ink gets in your eyes, wash them out with water at once and call a doctor if you are concerned.

69