e Wipe the inside and the outside of the paper tray with a dry, lint-free soft cloth to remove dust.

f Re-load the paper and put the paper tray firmly back in the machine.

g Plug the machine’s power cord back into the electrical socket first, connect all cables. Turn on the machine.

Routine maintenance

Cleaning the scanner glass

a Turn off the machine. Disconnect all cables, and then unplug the power cord from the electrical socket.

b Lift the document cover (1).

Clean the white plastic surface (2) and scanner glass (3) underneath it with a soft lint-free cloth moistened with water.

1

2

A

3

Note

In addition to cleaning the scanner glass and glass strip with a soft lint-free cloth moistened with water, run your finger tip over the glass to see if you can feel anything on it. If you feel dirt or debris, clean the glass again concentrating on that area. You may need to repeat the cleaning process three or four times. To test, make a copy after each cleaning.

c Plug the machine’s power cord back into the electrical socket first, connect all cables. Turn on the machine.

41