f Using both hands, slide the manual feed paper guides to the width of the paper that you are going to use.

g Using both hands, put one piece of A4 or Letter size paper in the manual feed slot until the top edge of the paper touches the paper feed roller. When you feel the machine pull in the paper, let go. The machine will start the Drum Cleaning process.

•If the paper in the manual feed slot is other than A4 or Letter size, the machine will stop the Drum Cleaning process and eject the paper.

•Make sure that the paper is straight and in the correct position in the manual feed slot. If it is not, it may not be fed correctly, resulting in a paper jam.

•DO NOT close the back cover (face-up output tray) during the Drum Cleaning process. The machine will stop the Drum Cleaning process and eject the paper. It may cause a jam.

•If the machine receives a print job before you put one piece of paper in the manual feed slot, the machine stops the Drum Cleaning process and print the print job.

h When the machine has finished cleaning, the machine returns to the Ready mode.

i Repeat steps e to h two more times using a new blank sheet of paper each time. Upon completion please discard the used paper.

Note

•The machine makes a mechanical noise during the Drum Cleaning process because the machine rotates the OPC drum in reverse. This noise is not due to a malfunction of the machine.

•DO NOT put more than one sheet of paper in the manual feed slot at any one time, as it may cause a jam.

44