Copy Mode (Type of Original)
You can select the Copy resolution for your type of original. The default setting is AUTO, which is used for originals that contain both text and photographs. TEXT is used for originals containing only text. PHOTO is used for copying photographs.
1 Press Menu, 3, 1.
2 Press 
or 
to choose the type of original (AUTO, TEXT or PHOTO), and then press Set.
3 Press 
or 
for additional settings.
Copy Contrast
You can adjust copy contrast to make copies darker or lighter.
1 Press Menu, 3, 2.
2 Press 
to make a copy 
to make a copy darker, and then press Set.
3 Press 
or 
for additional settings.
Paper Type
You can use the following types of paper for copying. For the best print quality, select the type of media that you use most often.
THIN | For thin paper or transparency |
PLAIN | For ordinary plain paper |
THICK | For heavy weight paper or rough paper |
THICKER | For heavier weight paper, rough paper or bond paper |
1 Press Menu, 3, 3. |
|
2 Press 
or 
to select your type of paper, and then press Set.
3 Press Stop/Exit.
Manual Feed Slot
The machine has a manual feed slot above the paper tray. You can load envelopes and special print media one at a time into this slot. You do not have to remove paper from the paper tray. (See Acceptable Paper, page 92.)
Use the manual feed slot to copy on labels, envelopes, organizer paper, card stock or thicker paper. (See Copying onto Thicker Paper and Card Stock, page 59.)
If you use transparencies, labels and envelopes, they must be of a type suitable for use with a laser printer. If you use incorrect types it is possible to damage or contaminate the drum surface and cause problems.
58Chapter 10