4. Printing Directly from Applications
This menu is available only for White ink ([ Color + White ] and [ White Only ]). RGB=255 white (paper color) is always transparent with no ink printed. RGB=0 black is transparent too when [ Print with Black ink ] is checked OFF, when black color is expressed with the background
You can select one transparent RGB color so that you can use red
(1)Check [ Transparent Color ] checkbox then the
(2)Select one color from the
<Note>
Only one Custom Color is available at a time. This RGB values will not be added to the list.
ToleranceSelect the range from the transparent color to the
<Note>
Smooth gradation depends on the original image data. Better to do test print in advance.
Choke WidthSometimes the mask White ink can be shown, which depends on the thickness of the
<Note>
If the value is bigger, some thin lines (in the letters, photos, etc) might disappear. Better to do test print in advance.
When the image data is
| [ 0 ] | no additional processing |
around | [10 ] | no change in tone, a little brighter, good for photos |
around | [20 ] | more vivid, for dull photo or RGB images |
around | [30 ] | for light CMYK images |
| [40 ] | maximum adjustment, for dull and plain CMYK images |
The bigger value, more adjustment. When the image data is in CMYK mode, change the RGB mode and print with both Saturation and Contrast around [ 30 ]. Sometimes the fine design may be flat with bigger [ Contrast ]. Better to do test print in advance because sometimes the print data is unexpectedly changed.
<Note>
This menu is the same as
57 |