4. Printing Directly from Applications
(3)Replace the Bush Platen Shaft with Platen Height Adjustment Lever assembled and the Platen Positioning Plate to the "Platen Lowering Set" (option).
|
| Positioning jig |
Bush platen shaft |
| |
|
| |
|
|
|
| Platen positioning plate |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| Machined surface |
| Platen height adjustment lever |
| ||
|
|
| ||
|
|
|
|
|
<Note>
Fix the Platen Positioning Plate by pushing it to the machined surface while the positioning jig is inserted into the Platen Arm.
(4)Install the Platen as it is and fix it. The Platen Height Adjustment Lever is in the lower hole.
Original position
After replacing to Platen Lowering Set, the Platen height is lowered by 13 mm.
68 |