4 - 3 OPTIONS
4
Hold the DIMM by the side edges. Line up the notches on the DIMM with the DIMM slot. (Check that
the locks on each side of the DIMM slot are open or facing outwards.)
Figure 4-4
5
Press the DIMM strai ght int o the slot ( pres s firml y). Ma ke sure the lo cks on each si de of the DIMM
click int o place. (To remove a DIMM, you must release the locks.)
6
Put the metal plate back on and secure the metal plate with the two screws.
7
Put the side cover back on.
8
Reconnect the interface cable (printer cable) to your computer. Plug the printer back i n, and then
turn on the print er power switch.
To check that you hav e installed the DIMM corre ctly, print the print er settings by using the sel ection
in the driver and check the pri ntout to make sure it shows the additional memory. See Printer
Settings and Prin t fonts in Chapter 3.