Place the printer
Please take note of the following before using the printer.
Power Supply∙Use the printer within the specified power range.
AC power: | ±10% of the rated power voltage in your country |
Frequency: | 50 Hz (220 V– 240 V) or 50/60 Hz |
Check the rating plate on the back of the printer for your model’s specification.
∙The power cord, including extensions, should not exceed 5 meters (16.5 feet).
∙Do not share the same power circuit with other
∙Use a voltage regulator if the power source is not stable.
Environment∙The printer should be installed near a power outlet, which is easily accessible.
∙Use the printer only within the following ranges of temperature and humidity.
Ambient temperature: | 10°C to 32.5°C (50°F to 90.5°F) |
Ambient humidity: | 20% to 80% (without condensation) |
∙The printer should be used in a well ventilation room.
∙Place the printer on a flat, horizontal surface.
∙Keep the printer clean. Do not place the printer in a dusty place.
∙Do not place the printer where the ventilation hole of the printer is obstructed. Keep a gap of approximately 100 mm (4 inches) between the ventilation hole and the wall.
∙Do not place the printer where it is exposed to direct sunlight. Use a blind or a heavy curtain to protect the printer from direct sunlight when the printer is unavoidably set up near a window.
∙Do not place the printer near devices that contain magnets or generate magnetic fields.
∙Do not subject the printer to strong physical shocks or vibrations.
∙Do not expose the printer to open flames or salty or corrosive gasses.
∙Do not place objects on top of the printer.
∙Do not place the printer near an air conditioner.
∙Keep the printer horizontal when carrying.
∙Do not cover the slots in the top cover.