Brother HL Series Off, Off, Off, Off, Note, ✒Note

Table 1: Serial Interface Parameters Settings

Selector	Parameters	On (up)	Off (down)
1	Baud Rate	See Table 2
2	Baud Rate	See Table 2
3	Data Length	7 bits	8 bits
4	Stop Bit	2 bits	1 bit
5	Parity	See Table 3.
6	Parity	See Table 3.
7	Protocol	Xon/Xoff + DTR	DTR only
8	Robust Xon	On	Off
Table 2: Baud Rate Settings
Selector 1	Selector 2	For RS-422A	For RS-232C
Off	Off	57600	9600
On	Off	9600	4800
Off	On	1200	1200
On	On	19200	19200
Table 3: Parity Settings
Selector 5	Selector 6	Parity
On	On	Odd
On	Off	Even
Off	Off	None

✒Note

∙The factory settings are indicated in bold ( all switches OFF ).

∙If the robust Xon setting is turned on with selector 8, the printer sends Xon signals at one second intervals to the connected computer until it receives data. It is effective only if selector 7 is set to the On position for the Xon/Xoff plus DTR setting.

2-6