✒Note

Both Alarm and Data (Toner) LEDs will blink continuously to indicate that the toner is nearly empty. This blinking does not stop until you have installed a new toner cartridge.

The toner cartridge is replaced in the following way. You can also view the toner cartridge replacement method in the instructional video on the supplied CD-ROM:

￿1. Open the front cover. Pull out the drum unit assembly.

Fig. 3-2 Removing the drum Unit

!Caution

∙It is recommended that you put the drum unit assembly on a piece of disposable paper or cloth in case of accidental toner spill or scatter.

∙Do not touch the electrodes shown below to prevent damage to the printer caused by static electricity.

Fig 3-3 Electrodes

3-4