CHAPTER 4 TROUBLESHOOTING

For Apple Macintosh Computers user using RS-100M (For HL-1250 Only)

Problem

Recommendation

Unable to print from

∙ Make sure that the supplied Macintosh printer driver is installed

application software.

in the System Folder and it is selected with Chooser.

 

∙ Check the PORT selection within the Chooser : it should match

 

the port to which you physically attached the printer cable.

 

∙ The serial slide switch of the optional interface board should be

 

in the Apple (RS-422A) position.

 

∙ Check the printer cable type : you cannot use a Local Talk or

 

straight-through cable. Refer to Chapter 2 for details on printer

 

cable types.

For iMac and Power Macintosh G3 with USB (For HL-1240/1250 Only)

Problem

Recommendation

HL-1240 (or HL-1250) does

∙ Check the printer is turned on.

not appear in Chooser.

∙ Check the USB interface cable is connected correctly.

 

∙ Check the printer driver is installed correctly.

Unable to print from

Make sure that the supplied Macintosh printer driver is installed in

application software.

the System Folder and it is selected with Chooser.

4-17