4 - 5 GETTING STARTED
Setting the Phone Line Type
If you are connecting thi s machine to a PBX or PABX, you need to
change the Phone Line Type to PBX by completing the following
steps. If you are connecting this machine to a phone line that is also
using a ADSL (Asymmetric Dig ital Subscriber Line) to send and
receive faxes, it is also necessary to change the Phone Line Type to
ADSL by completing the following steps.
1
Press Menu/Set, 0, 5.
2
Press or to select
PBX,
ADSL (or Normal).
Press Menu/Set.
3
Press Stop/Exit.
PABX and TRANSFER
The machine is initially set to be connected with PSTN (Public
Switched Telephone Netwo rk) lines. However, many offices use a
central telephone system or Private Automatic Branch Exchange
(PABX). Your fax can be connected to most types of PABX. The
recall facility on the mach ine supports timed break recal l only (TBR),
PABX normally can work with this for gaining access to an outside
line, or for transferring a call to another extension: The feature works
when the Tel/R key is pressed with Shift key.
You can program a Tel/R keypress as part of a number stored
in a One-Touch or Speed-Dial loc ation. When programming the
One-Touch or Speed-Dial numb er (Function menu 2-3-1 or
2-3-2) press Tel/R first with Shift (the screen displays "!"), then
enter the telephone number. If you do this, you do not need to
press Tel/R with Shift each time befo re you dial using a
One-Touch or Speed-Dial location. (See Storing numbers for
easy dialling on page 7-1.)
However, if PBX is set to Off, you cannot use the One-Touch
or Speed-Dial number that the Tel/R key press is programmed
into.
5.Phone Line Set