SETUP SEND 6 - 18
Using TX Lock
You must use a password to switch TX Lock ON and OFF.
Setting Up the TX Lock for the First Time
1
Press Menu/Set, 2, 0, 1.
2
Enter a 4-digit number as a new
password.
3
Press Menu/Set.
The screen prompts you to re-enter
the password.
4
Re-enter the password and press Menu/Set.
5
Press or to choose Set TX Lock.
6
Press Menu/Set. The screen
prompts you to enter the password.
7
Enter a 4-digit passwor d, followed by Menu/Set.
This is the same as the secu rity password of the machine
already stored.
The screen displays Accepted for 2 seconds, followed by
TX Lock Mode - TX Lock is now switched ON.
If the password you enter at Step 7 is incorrect, the screen
would display Wrong Password . After 2 seconds the display
will then return to normal (displaying the date & time). You must
then switch ON TX Loc k again. (See Switching TX Lock ON on
page 6-19.)
1.TX Lock
New Passwd:XXXX
Verify:XXXX
Password:XXXX