SETUP SEND 6 - 8
Dual Access (Not available f or colour faxes)
You can dial a number, and begi n scanning the fax into memory—
even when the machine is sending from memory or receiving faxes.
The LCD shows the new job number a nd available memory.
Real Time Transmission
When you are sending a fax, the machine will scan the documents
into the memory before sending. Then, as soon as t he phone line is
free, the machine will start dialling and sending.
If the memory becomes full, the machine will send the document in
real time (even if Real Time TX is set to Off).
Sometimes, you may want to send an important document
immediately, without wa iting for memory transmission . You can set
Real Time TX to On for all documen ts or for the next fax only.
1
If it is not illuminated i n green, press (Fax).
2
Load your document. (See Load documents on page 2-1.)
3
Press Menu/Set, 2, 2, 5.
Your machine normally uses Dual Access. However, to send a
colour fax, the machine will send the original in real time (even
if Real Time TX is Off).
The number of pages you can scan into the memory will vary
depending on the data that i s printed on them.
If you get an Out of Memory message while scanning the first
page of a fax, press Stop/Exit to cancel scanning. If you get an
Out of Memory message while scanning a subsequent page,
you can press Mono Start to send the pages scanned so far,
or press Stop/Exit to cancel the operation.
5.Real Time TX