6 - 7 SETUP SEND
Manual and automatic fax R edial
If you are sending a fax manual ly and the line is busy, press

Redial/Pause, and then press Mono Start or Colour Start to try

again. If you want to make a second call to the last number dialled,
you can save time by pressing Redial/Pause and Mono Start or
Colour Start.
Redial/Pause only works if you dialled from the control panel.
If you are sending a fax automatically and the line is busy, the
machine will automatic ally redial up to three times at five minutes
intervals.
Colour fax transmission
Your machine can send a colour fax to machines that support this
feature.
However, colour faxes cannot be stored in the memory, so Delayed
fax and Polling Transmit features are not available.
1
If it is not illuminated in green, press (Fax).
2
Load your document. (See Load documents
on page 2-1
.)
3
Enter the fax number using the di al pad, One-Touch,
Speed-Dial or Search.
4
Press Colour Start.
When you send a colour fax, the ma chine will send it in real t ime
(even if Real Time TX is set to Off).