Paging
When Paging is chosen, the machine dials the cell phone or pager number you programmed. This activates your cell phone or pager so you will know that you have a fax message in the machine’s memory.
a Press Menu, 2, 5, 1.
25.Remote Fax Opt 1.Fwd/Page/Store
aPC Fax Receive
b Off
Select ab or OK
b
c Enter your cell phone or pager number followed by # # (up to 20 digits). Press OK.
Do not include the area code if it is the same as that of your machine.
For example, press
1 8 0 0 5 5 5 1 2 3 4 # #.d Do one of the following:
If you pager needs a PIN, enter the PIN, press #, press Redial/Pause, enter your fax number followed by ##. Press OK. (For example, press:
1 2 3 4 5 # Redial/Pause 1 8 0 0 5 5 5 6 7 8 9 # #)If you do not need a PIN, press OK.
If you are programming a cell phone number, press OK.
e Press Stop/Exit.
Note
•If you have set Paging, a backup copy will automatically be printed at the machine.
•You cannot change a pager, cell phone or PIN number remotely.
Receiving a fax
Fax Storage
The Fax Storage feature lets you store your received faxes in the machine’s memory. You can retrieve stored fax messages from a fax machine at another location using the remote retrieval commands. (See Retrieving fax messages uu page 30.) Your machine will automatically print a copy of the stored fax.
a Press Menu, 2, 5, 1. | 4 |
25.Remote Fax Opt | |
1.Fwd/Page/Store |
|
aPC Fax Receive
b Off Select ab or OK
b Press a or b to choose Fax Storage. Press OK.
c Press Stop/Exit.
27