Load your document.

f Press Start.

After the machine scans the first side of the card, the LCD will display the following instruction.

Turn over the ID

Then Press Start

g Turn over your identification card and place it at the left side of the scanner glass.

h Press Start. The machine scans the other side of the card and prints the page.

Note

When 2 in 1 ID Copy is chosen, the machine sets the quality to Photo and the contrast to +2 (-nnnno+).

Making copies

Tray selection

You can change the Tray Use only for the next copy.

a Make sure you are in COPY mode

.

b

c Use the dial pad to enter the number of copies (up to 99).

d Press Options. Press a or b to choose Tray Select. Press OK.

e Press d or c to choose the MP>T1, M>T1>T2 1, T1>MP, T1>T2>M 1, #1(XXX) 2, #2(XXX) 1 2 or MP(XXX) 2.

1 T2 and #2 appears only if the optional lower

7

tray is installed on MFC-8710DW,

MFC-8810DW or MFC-8910DW.

2XXX is the paper size you set in Menu, 1, 2, 2.

f Press OK.

g Press Start.

Note

To change the default setting for Tray Select, see Basic User's Guide: Tray Use in COPY mode.

55