Additional receiving operations
Receiving faxes into memory when paper tray is empty
As soon as the paper tray becomes empty during fax reception, the Touchscreen shows No Paper Fed. Put some paper in the paper tray. (See Basic User’s Guide: Loading paper and other print media.)
If you don't put paper in the paper tray, the machine will continue receiving the fax, with the remaining pages being stored in the memory, if enough memory is available.
When the memory is full, the machine will stop answering calls. To print the faxes, put fresh paper in the tray.
Printing a reduced incoming fax
If you choose On, the machine reduces each page of an incoming fax to fit on one sheet of Letter, Legal, Ledger, A4 or A3 size paper.
The machine calculates the reduction ratio by using the page size of the fax and your Paper Size setting.
(See Basic User’s Guide: Paper Size and Type.)
a Press 
.
b
c Swipe up or down, or press a or b to display Fax.
d
e Swipe up or down, or press a or b to display Setup Receive.
f Press Setup Receive.
Receiving a fax
g Swipe up or down, or press a or b to display Auto Reduction.
h Press Auto Reduction.
i Press On (or Off).
j Press 
.
Receiving a fax at the end of a
conversation4
At the end of a conversation, you can ask the other party to fax you information before you both hang up. Make sure the ADF is empty.
a Ask the other party to place the document in their machine and to press the Start or Send key.
b When you hear the other machine's CNG tones (slowly repeating beeps), press Fax Start.
NOTE
If the Touchscreen is dark for Sleep mode, touch it to display Fax Start.
c Press Receive to receive the fax.
d Replace the handset of the external telephone.
29 