Press Set New Default.
Press Factory Reset.
Press Print Settings.
Press OK.
Press Print Settings.
Press OK.
Press Photo.
Press Photo.
Open the media slot cover.
Open the media slot cover.

PhotoCapture Center™: Printing photos from a memory card or USB Flash drive

Setting your changes as the new default

You can save the print settings you use most often—such as Print Quality,

Paper Type, Paper Size, Print Size, Auto Correct, Brightness, Contrast, Color Enhance, Cropping, Borderless and Print Date—by setting them as the default settings. These settings will stay until you change them again.

a

b Put the memory card or USB Flash drive in the correct slot.

c

d Swipe left or right to display View Photos.

e Press View Photos. Press OK.

f Swipe left or right, or press d or c to display each photo. When the photo you want is displayed, press it, and then press OK.

g h

i Press your new setting.

Repeat this step for each setting you want to change.

j After changing the last setting, swipe up

or down, or press a or b to display Set New Default.

k

l The Touchscreen asks you to confirm the change to the new default settings. Press Yes to confirm.

m Press .

Restoring all settings to the factory settings

You can restore the PhotoCapture settings that you have changed—such as Print Quality, Paper Type, Paper Size, Print Size,

Auto Correct, Brightness, Contrast, Color Enhance, Cropping, Borderless and Print Date—to the factory settings.

a

b Put the memory card or USB Flash drive in the correct slot.

c

d Swipe left or right to display View Photos.

e Press View Photos.

 

Press OK.

8

f Swipe left or right, or press d or c to display each photo. When the photo you want is displayed, press it, and then press OK.

g h

i Swipe up or down, or press a or b to display Factory Reset.

j

k The Touchscreen asks you to confirm to change back to the factory settings. Press Yes to confirm.

l Press .

71