Press Photo.
Open the media slot cover.

PhotoCapture Center™: Printing photos from a memory card or USB Flash drive

g Swipe up or down, or press a or b to display 2x2inch, 25x36mm, 35x45mm, 36x51mm, 45x45mm, 45x55mm, 35x48mm or 50x70mm (2x2.75inch), and then press the option you want to set as the photo size.

NOTE

The machine automatically crops the photo according to the size you choose. You cannot trim the photo further.

h Confirm the image displayed on the Touchscreen.

Rotate the image if necessary by

pressing . i Press OK.

j Do one of the following:

Press Print Settings to change the print settings. Go to step k.

If you do not want to change any settings, press Start to print.

k Do one of the following:

To change the print quality, press

Print Quality. Press Normal or Photo.

To change the paper type, press

Paper Type.

Press Plain Paper,

Inkjet Paper, Brother BP71 or

Other Glossy that you want to set.

To change the paper size, press

Paper Size.

Press 4"x6", 5"x7", Letter or A4 that you want to set.

To add enhancement effects, press

Photo Enhance.

Press Auto Correct, Remove Red-Eye,

Auto Correct & Remove Red-Eyeor Off that you want to set.

l When you are finished changing the settings press OK.

m Press Start.

Slide Show

You can view all your photos on the Touchscreen using Slide Show. You can also choose a photo during the operation.

a

b Put the memory card or USB Flash drive in the correct slot.

c

d Swipe left or right to display Slide Show.

e Press Slide Show.

 

Press OK.

8

 

f Do one of the following:

If you want to change the length of time the Touchscreen shows each photo, press

Show Each Photo for.

Swipe up or down, or press a or b to display 3Secs, 10Secs, 30Secs,

1Min or 5Mins, and then press the option you want to set.

If you want to change the effect, press Effect.

Press Slide In, Fade In, Zoom In or Off.

If you do not want to change the settings, press Start.

g Press to finish Slide Show.

63