Press Thin Paper Copy.
Press Advanced Settings.
Press Auto (or Off).
Press Auto Deskew.

Chapter 7

Thin Paper Copy

If your document is a 2-sided Copy on thin paper, choose Thin Paper Copy so the print on the other side does not bleed through.

a Load your document.

b Press (Copy).

c Enter the number of copies you want. d Press Options.

e Swipe up or down, or press a or b to

display Advanced Settings.

f

g Swipe up or down, or press a or b to display Thin Paper Copy.

h

i Read and confirm the displayed list of settings you have chosen, and then press OK.

j Press Black Start or Color Start.

NOTE

ADF High Speed Mode, Fit to Page, Page Layout, Auto Deskew, Ink Save Mode, Book Copy, Watermark Copy and Remove Background Color are not available with Thin Paper Copy.

Auto Deskew

If your scanned copy is skewed, your machine can correct the data automatically.

This setting is only available when using the scanner glass.

a Load your document.

b Press (Copy).

c Enter the number of copies you want. d Press Options.

e Swipe up or down, or press a or b to display Auto Deskew.

f g

h If you do not want to change additional settings, press OK, and then press Black Start or Color Start.

NOTE

•1to2, Poster, Ink Save Mode, Thin Paper Copy, Book Copy, Watermark Copy,

Remove Background Color, ADF High Speed Mode, 2-sidedi2-sided and

2-sidedi1-sided of 2-sided Copy are not available with Auto Deskew.

•You cannot use this setting with Ledger, A3 or paper that is smaller than

2.52 in. × 3.58 in. (64 mm × 91 mm).

•This setting is only available for paper that is rectangular or square.

•You cannot use this setting with a thick document, such as a book.

•Auto Deskew is only available if the document is skewed by less than 3 degrees.

50