You can reduce the amount of paper used for copies by copying on both sides of the paper.
We recommend you load your document in the ADF for
NOTE
•You can copy
•You can use only Letter, A4, A5, Executive, Legal, A3, or Ledger size plain paper.
a Load your document.
If you want to copy a
b Press (Copy).
c d
e If you want to sort multiple copies, swipe up or down, or press a or b to display Stack/Sort.
f g
h Swipe up or down, or press a or b to display
i Press
j Swipe up or down, or press a or b to display the
Flip,
Flip,
Edge Flip,
Short Edge Flip, (or Off).
(See
k Review your settings on the Touchscreen, and then press OK.
Making copies
l Press Black Start or Color Start. If you placed the document in the ADF, the machine scans the pages and starts printing.
If you are using the scanner glass, go to step m.m The Touchscreen shows:
Turn over the document (or Flip the book), then press [Scan]. When you finish, press [Complete].
Place the next page on the scanner glass and press Scan.
Press OK.
The machine starts printing.
n If you pressed Sort for multiple copies, | 7 |
repeat step m for each page.
After all the pages have been scanned, press Complete.
The machine starts printing.
DO NOT touch the printed page until it is ejected the second time. The machine will print the first side and eject the paper and then pull the paper in to print the second side.
NOTE
•If you get a paper jam, press Advanced after step i, and then press one of the jam prevention settings:
•2in1(ID), Poster, Book Copy and
Fit to Page are not available with
•1to2 and Auto Deskew are not available with
53