Checking the ink volume
Although an ink volume icon appears on the Touchscreen, you can use the ink menu to see a large graph showing the ink that is left in each cartridge.
a Press 
.
NOTE
You can also press 
and Ink.
b Press Ink Volume.
The Touchscreen shows the ink volume.
NOTE
When the ink cartridge is near the end of its life or having a problem, one of the following icons is displayed.
The ink level is low.
The ink cartridge is empty.
There is a problem with the ink cartridge.
Packing and shipping the machine
When you transport the machine, use the packing materials that came with your machine. If you do not pack the machine correctly, any damage that may occur in transit may not be covered by your warranty.
The machine should be adequately insured with the carrier.
IMPORTANT
It is important to allow the machine to “park” the print head after a print job. Listen carefully to the machine before unplugging it to make sure that all mechanical noises have stopped and the print head is in the right corner as shown in the illustration. Not allowing the machine to finish this parking process may lead to print problems and possible damage to the print head.
c Press 
.
NOTE
You can check the ink volume from your computer.
For more information, see Software and Network User’s Guide: Monitor the Ink Level and Status of the Machine from
Your Computer (Windows®) or Monitor Machine Status from Your Computer (Macintosh).
a Unplug the machine from the AC power outlet.
b Using both hands, use the finger holds on each side of the machine to lift the scanner cover into the open position.
Then unplug the machine from the telephone wall jack and take the telephone line cord out of the machine.
c Unplug the interface cable from the machine, if it is connected.
84