| Troubleshooting |
| Printing received faxes (continued) | |
|
|
Difficulties | Suggestions |
Received faxes appear as split or | Left and right margins are cut off or a single page is printed on two pages. |
blank pages. | See Paper Size uu page 16. |
| |
|
|
| Turn on Auto Reduction. |
| See Advanced User's Guide: Printing a reduced incoming fax. |
|
|
Difficulties | Suggestions |
Dialing does not work. (No dial | Check all line cord connections. Make sure the telephone line cord is plugged into |
tone) | the telephone wall jack and the LINE jack of the machine. |
|
|
| (Canada only) Change Tone/Pulse setting. |
| See Quick Setup Guide. |
|
|
| Send a manual fax by pressing Hook and dialing the number. Wait to hear fax |
| receiving tones before pressing Start. |
|
|
| If there is no dial tone, connect a known working telephone and telephone line |
| cord to the jack. Then lift the external telephone's handset and listen for a dial |
| tone. If there is still no dial tone, ask your telephone company to check the line |
| and/or wall jack. |
|
|
The machine does not answer | Make sure the machine is in the correct receive mode for your setup. |
when called. | |
| |
| Check for a dial tone. If possible, call your machine to hear it answer. If there is |
| still no answer, check the telephone line cord connection. If you do not hear ringing |
| when you call your machine, ask your telephone company to check the line. |
|
|
B
107