Brother N5V, NX-450 Overcasting Stitches, Sewing overcasting stitches using overcasting foot “G”

UTILITY STITCHES ———————————————————————————————————————————

Overcasting Stitches

Sew overcasting stitches along the edges of cut fabric to prevent fabric from fraying. Fifteen stitches are available for overcasting. The procedure for sewing overcasting stitch is explained according to the presser foot that is used.

Sewing overcasting stitches using overcasting foot “G”

Three stitches can be used to sew overcasting with overcasting foot “G”.

	Pattern	Numeric		Stitch Width		Stitch Length		Presser
Stitch Name		Key	Application	[mm (inch)]		[mm (inch)]
								Foot
				Auto	Manual	Auto	Manual
	11		Preventing fraying in	3.5	2.5–5.0	2.0	1.0–4.0
			medium weight and
				(1/8)	(3/32–3/16)	(1/16)	(1/16–3/16)
			thin fabrics
Overcasting
	12			5.0	2.5–5.0	2.5	1.0–4.0	G
stitch
			Preventing fraying in	(3/16)	(3/32–3/16)	(3/32)	(1/16–3/16)
			thick fabrics and
	13
		–	fabrics that fray easily	5.0	3.5–5.0	2.5	1.0–4.0
				(3/16)	(1/8–3/16)	(3/32)	(1/16–3/16)

aAttach overcasting foot “G”.

G

•For details, refer to “Replacing the presser foot” (page 41).

bSelect a stitch.

•For details, refer to “Selecting stitching” (page 72).

cPosition the fabric with the edge of the fabric against the guide of the presser foot, and then lower the presser foot lever.

a

dSew with the edge of the fabric against the presser foot guide.

1

aNeedle drop point

CAUTION

●After adjusting the stitch width, slowly turn the handwheel toward you (counterclockwise) and check that the needle does not touch the presser foot. If the needle hits the presser foot, the needle may bend or break.

aGuide

76