Brother N5V, NX-450 Getting Ready, dInsert the extra spool pin onto the bobbin winder shaft

GETTING READY ————————————————————————————————————————————

dInsert the extra spool pin onto the bobbin winder shaft.

Insert the extra spool pin so that it is perpendicular to the bobbin winder shaft.

1

aBobbin winder shaft

eSwinghorizontal.down the spool pin so that it is

fPlace the upper thread spool for the needle on the right side onto the extra spool pin, and then secure it with the spool cap.

The thread should unroll from the top front of the spool.

1 2

aSpool cap

bSpool

gThread the upper thread for the right side in the same way that the upper thread for the left side was threaded.

1

aThread guide cover

•For details, refer to step h through j of “Threading the upper thread” (page 28).

hWithout passing the thread through the needle bar thread guide, manually thread the right needle.

Pass the thread through the eye of the needle from the front.

•The needle threader cannot be used with the twin needle. If the needle threader is used with the twin needle, the sewing machine may be damaged.

iAttach zigzag foot “J”.

•For details on changing the presser foot, refer to “Replacing the presser foot” (page 41).

CAUTION

●When using the twin needle, be sure to attach zigzag foot “J”, otherwise the needle may break or the machine may be damaged.

jTurn on the sewing machine.

XThe LCD comes on.

34