Brother N5V, NX-450 operation manual Starting to sew, Sewing Basics, Using the operation buttons

SEWING BASICS ————————————————————————————————————————————

Starting to sew

Once you are ready to start sewing, you can start the sewing machine. The sewing speed can be adjusted using either the sewing speed controller or the foot controller.

Note

Important:

zWhen the foot controller is plugged in, (“Start/Stop” button) cannot be used to start

or stop sewing.

■Using the operation buttons

Sewing can be started and stopped using the

operation button (“Start/Stop” button).

aSlide the sewing speed controller to the left or right to select the desired sewing speed.

Slide the sewing speed controller to the left to sew at a slower speed, or slide the speed controller to the right to sew at a faster speed.

1

aSewing speed controller

bPress (“Start/Stop” button) once.

1

a“Start/Stop” button

XThe machine starts sewing.

•If you continue to hold (“Start/Stop” button) pressed immediately after the sewing

starts, the machine will sew at a slow speed.

cWhen the end of the stitching is reached, press (“Start/Stop” button) once.

XThe machine stops sewing with the needle down (in the fabric).

dWhen you are finished sewing, raise the needle, and then cut the threads.

XFor details, refer to “Cutting the thread” (page 55).

■Using the foot controller

Sewing can be started and stopped using the foot controller.

aTurn off the sewing machine.

When connecting the foot controller, be sure to turn off the sewing machine in order to prevent the machine from accidentally being started.

52