Brother NX-450, N5V Useful Functions, Memo, dPosition the fabric under the presser foot, and

————————————————————————————————————————————————————

cPressstitch key). (Automatic reverse/reinforcement

This step is not necessary if a stitch such as those for sewing buttonholes and bar tacks is selected where reinforcement stitches are automatically sewn.

X (Automatic reverse/reinforcement stitch key) lights up, and the sewing machine

is set for automatic reverse/reinforcement stitching.

•To turn automatic reverse/reinforcement

stitching off, press (Automatic reverse/ reinforcement stitch key) until the key is no

longer lit.

•When the sewing machine is turned off, the automatic reverse/reinforcement stitching setting is cancelled.

dPosition the fabric under the presser foot, and

then press (“Start/Stop” button) once.

1

a“Start/Stop” button

XAfter reverse/reinforcement stitches are sewn, the machine starts sewing.

eAfter reaching the end of the stitching, press

(“Reverse/Reinforcement Stitch” button) once.

This step is not necessary if a stitch such as those for sewing buttonholes and bar tacks is selected where reinforcement stitches are automatically sewn.

2

1

a“Reverse/Reinforcement Stitch” button

XAfter reverse/reinforcement stitches are sewn, the sewing machine stops.

Memo

zReverse/reinforcement stitches WILL NOT be

sewn until (“Reverse/Reinforcement

Stitch” button) is pressed. (“Start/Stop” button) may be pressed to stop stitching

when needed such as for pivoting corners.

Useful Functions 61