Brother NX-450, N5V operation manual Sewing Cylindrical or Large Pieces, Memo

————————————————————————————————————————————————————

cInstall the wide table.

Keeping the wide table level, fully slide it into place. The lower right corner section of the wide table extends over the front section of the sewing machine bed.

2

1

aLower right corner

bSewing machine bed

Note

zThe optional wide table is available through your brother dealer.

dTurn the screw at the bottom of each leg to adjust their height so the wide table will be level with the sewing machine bed.

CAUTION

●Do not move the sewing machine while the wide table is attached, otherwise damage or injuries may occur.

eWhenremoveyouit. are finished using the wide table, While slightly lifting up the wide table, pull it off to the left.

fInstall the flat bed attachment back in its original position.

Memo

z With the legs folded up, the wide table can	1
be stored attached to the hard case.

zThe knee lifter can be stored attached to the bottom of the wide table.

Sewing Cylindrical or Large Pieces 47