Brother N5V Sewing overcasting stitches using the optional side cutter, Remove the presser foot

UTILITY STITCHES ———————————————————————————————————————————

Sewing overcasting stitches using the optional side cutter

Using the side cutter, seam allowances can be finished while the edge of the fabric is cut off. Five stitches can be used to sew overcasting stitches with the side cutter.

	Pattern		Stitch Width		Stitch Length		Presser
Stitch Name		Application	[mm (inch)]		[mm (inch)]
							Foot
			Auto	Manual	Auto	Manual
	63	Sewing straight stitches while	0.0	0.0–2.5	2.5	0.2–5.0
		cutting the fabric	(0)	(0–3/32)	(3/32)	(1/64–3/16)
	64	Sewing zigzag stitches while	3.5	3.5–5.0	1.4	0.0–4.0
		cutting the fabric	(1/8)	(1/8–3/16)	(1/16)	(0–3/16)
Overcasting	65	Preventing fraying in thin and	3.5	3.5–5.0	2.0	1.0–4.0	S
		medium weight fabrics while
stitch			(1/8)	(1/8–3/16)	(1/16)	( 1/16–3/16)
		cutting the fabric
	66	Preventing fraying in thick	5.0	3.5–5.0	2.5	1.0–4.0
		fabrics while cutting the fabric	(3/16)	(1/8–3/16)	(3/32)	( 1/16–3/16)
	67	Preventing fraying in thick	5.0	3.5–5.0	2.5	1.0–4.0
		fabrics while cutting the fabric	(3/16)	(1/8–3/16)	(3/32)	( 1/16–3/16)

aRemove the presser foot.

•For details, refer to “Replacing the presser foot” (page 41).

bLower the presser foot lever, and then manually thread the needle.

•The needle threader cannot be used. If the needle threader is used with the side cutter, the sewing machine may be damaged.

cRaise the presser foot lever.

dHook the connecting fork of the side cutter onto the needle clamp screw.

a

b

aConnecting fork

bNeedle clamp screw

ePosition the side cutter so that side cutter pin is aligned with the notch in the presser foot holder, and then slowly lower the presser foot lever.

b

a

aNotch in presser foot holder

bPin

XThe side cutter is attached.

78