Brother NX-450, N5V Upper Threading, e Removespool pin.the spool cap that is inserted onto the

————————————————————————————————————————————————————

cPress (“Needle Position” button) once or twice to raise the needle.

1

a“Needle Position” button

XThe needle is correctly raised when the mark on the handwheel is at the top, as shown below. Check the handwheel and, if this

mark is not at this position, press (“Needle Position” button) until it is.

1

aMark on handwheel

dOpen the top cover.

eRemovespool pin.the spool cap that is inserted onto the

1

2

aSpool pin

bSpool cap

fPlace the spool of thread onto the spool pin. Slide the spool onto the pin so that the spool is horizontal and the thread unwinds to the front at the bottom.

1

CAUTION

●If the spool or the spool cap is not positioned correctly, the thread may become tangled around the spool pin and the needle may break.

gSlide the spool cap onto the spool pin. Slide the spool cap as far as possible to the right, as shown, with the rounded side on the left.

CAUTION

●If the spool or the spool cap is not positioned correctly, the thread may become tangled around the spool pin and the needle may break.

●Three spool cap sizes are available (large, medium and small), allowing you to choose a spool cap that best fits the size of spool being used. If the spool cap is too small for the spool being used, the thread may catch on the slit in the spool and the needle may break.

Upper Threading 29