Brother PC 3000 operation manual Screen, About the screen, Adjusting the brightness of the screen

SCREEN

3

1

2

5

4

6

1Shows the presser foot symbol.

2Shows whether the automatic reinforcement stitching is turned on or off.

3Displays an example of the selected stitch and any messages or errors.

4Shows the number of the selected stitch.

5Shows the width of the stitch.

Normally, the appropriate stitch width for the se- lected stitch is shown in white numbers on a black background. If the stitch width is manu- ally adjusted, it will appear in black numbers with no background.

6Shows the length of the stitch.

Normally, the appropriate stitch length for the selected stitch is shown in white numbers on a black background. If the stitch length is manu- ally adjusted, it will appear in black numbers with no background.

Automatic/manual display

Automatic (standard value)

Manual (set value)

If no value is displayed, the setting cannot be ad- justed.

About the screen

Note

–Some or all of the screen may become darker or lighter at times due to changes in the ambient tempera- ture around the screen. This is normal and is not a sign of a malfunction. Adjust the screen if it is difficult to read. Please refer to instructions for adjusting the brightness of the screen.

Adjusting the brightness of the screen

When the screen is hard to read, slide the screen brightness control lever to adjust the brightness of the screen. If the screen is too light, slide the lever up; if the screen is too dark, slide the lever down.

10