Brother PC 3000 Bobbin Winding / Bobbin Thread Setting, Spool cap 2 Spool 3 Spool pin, 324,9

BOBBIN WINDING / BOBBIN THREAD SETTING

Winding the bobbin and setting the bobbin thread

CAUTION

Be sure to use the specified bobbin (part code 136492-151). Using a different bobbin may result in injuries or damage.

324,9

5

6

7,8

1

3
	1	2
3		1

2

1.Connect the machine to the power supply and turn on the main power.

2.Place the spool of thread on the spool pin. The thread end should come from the bottom front of the spool. The spool cap closest to the thread spool size should be used to hold the spool securely on the spool pin.

1Spool cap

2 Spool

3 Spool pin

*The spool cap should be pushed on as far as it will go.

Note

If using a fine thread such as cross wound thread, slightly sepa- rate the spool cap (small) from the spool of thread before using it.

1Cross wound thread

2 Spool cap (small)

3 Gap

13