Brother PC 3000 operation manual Setting the bobbin, Bobbin cover 2 Bobbin cover release button

Setting the bobbin

1

2

1. Slide open the bobbin cover.

1Bobbin cover

2Bobbin cover release button

2.Insert the bobbin into the shuttle with the thread direction as shown in the diagram.

1

3.Guide the thread end through the slit, then pull the thread to- ward you to cut off any excess thread.

1Built-in thread cutter

1 2

4.Close the bobbin cover by placing the left end in place and pressing down lightly on the right end so that it snaps into place.

*You can begin sewing immediately without drawing up the bob- bin thread.

15