Brother PC 3000 Extra spool pin for right needle threading, Stitch width, Stitch length

1

2

5

6

1

4.Set the extra spool pin into the hole on the end of the bobbin winder shaft on the top of the machine. Follow the instructions for single-needle threading.

1Extra spool pin for right needle threading.

2 Push the spool pin securely into place.

5.Thread through remaining points, making certain to omit the thread guide above the needle and pass thread through right eye of needle.

1The thread for the right needle should pass in front of thread guide.

CAUTION

Stitch width

Adjust the stitch width. Turn the balance wheel to check the nee- dle clearance, so that the needle does not hit the needle plate.

Stitch length

•Straight 2 mm min.

•Others 0.5 mm min.

Types of thread

Cotton thread or span thread are recommended because syn- thetic threads may break.

75