Brother PC 3000 Starting And Stopping Sewing, “START/STOP” button, Foot controller

STARTING AND STOPPING SEWING

“START/STOP” button

1 Place the fabric under the presser foot, lower the presser foot, and then press the “START/STOP” button. The sewing ma- chine starts sewing.

*Slide the speed range control lever to adjust the sewing speed.

*Hold down the “START/STOP” button to sew at a slow speed.

2. Press the “START/STOP” button to stop the sewing machine.

Foot controller

1

2

Note

Do not allow fabric pieces and dust to collect in the foot controller. Doing so could cause a fire or an electric shock.

1.With the sewing machine turned off, insert the foot controller plug into its jack on the sewing machine.

1Foot controller

2Foot controller jack

2.Turn on the sewing machine, then slowly depress the foot con- troller to start sewing.

*The speed set using the speed range control lever is the foot controller’s maximum sewing speed.

3. Release the foot controller to stop the sewing machine.

*When the foot controller is being used, the “START/STOP” button has no effect on the sewing.

Note (For U.S.A. only) Foot controller: Model N5V

This foot controller can be used for sewing machine model PC- 3000.

19