Brother PC 3000 Flat Fell Seam, For reinforcing seams and neatly finishing edges, Reverse side

FLAT FELL SEAM

00

J

For reinforcing seams and neatly finishing edges

1.Attach presser foot “J”. Sew the seam line, then cut half of the seam allowance from the side that the flat fell seam will lie against.

1About 1.2 cm (1/2")

2 Reverse side

*Before sewing, touch the automatic reinforcement stitching key to sew reinforcement stitches automatically at the begin- ning and at the end of the stitch.

2. Spread out the fabric along the finish line.

1Finish line

2 Reverse side

3.Lay both seam allowances to the shorter one’s (cut one) side and iron them.

1Reverse side

4.Fold the longer seam allowance around the shorter one, and sew the edge of the fold.

1Reverse side

64