Brother PC 3000 Buttons that do not fit into the guide plate Odd-shaped buttons, Example

3.Once sewing is completed, pull the gimp thread gently to re- move any slack, then trim off any excess.

Buttons that do not fit into the guide plate (Odd-shaped buttons)

1

4 2

5

3

6

Measure the button diameter + thickness to set the plate.

Example:

For a button with a diameter of 1.5 cm (19/32") and a thickness of 1 cm (25/64"), the scale should be set at 2.5 cm (1")

1Thickness [1 cm (25/64")]

2 Diameter [1.5 cm (19/32")]

3 Button holder plate

4 Scale

5 Diameter + thickness [2.5 cm (1")]

[0.5 cm (13/64") in one scale.]

6 0.5 cm (13/64")

46