Brother PC 3000 Maintenance, Cleaning the screen, Cleaning the sewing machine surface

MAINTENANCE

CLEANING

Cleaning the screen

CAUTION

Disconnect the power cord from the wall socket before cleaning the screen, otherwise injury or electrical shock may result.

If the front panel is dirty, wipe it gently with a soft, dry cloth. Do not use any organic solvents or detergents.

Cleaning the sewing machine surface

CAUTION

Disconnect the power cord from the wall socket before cleaning the sewing machine surface, otherwise injury or electrical shock may result.

If the surface of the sewing machine is dirty, lightly soak a cloth in neutral detergent, squeeze it out firmly and then wipe the surface. After cleaning it once in this way, wipe the surface again with a dry cloth.

Cleaning the shuttle

CAUTION

Disconnect the power cord from the wall socket before cleaning the shuttle, otherwise injury or electrical shock may result.

Sewing performance will suffer and bobbin thread detection will become unreliable if dust collects in the shuttle. It should be kept clean at all times.

5

Always keep the machine clean.

1.Turn off the power and remove the presser foot holder and the needle.

5

6

1

2.Loosen the screws.

3.Remove the needle plate.

1Needle plate

88