Bryant 355CAV Codes And Standards, Return-AirTemperature, Installation in a Garage, Safety

	Installer Packet Includes:
	Installation, Start--- up, and Operating Instructions
	Service and Maintenance Instructions
	User’s Information Manual
	Warranty Certificate
	Loose Parts Bag includes:	Quantity
	Collector Box or Condensate trap extension tube	1
	Inducer housing drain tube	1
	1/2--- in CPVC street elbow	2
	Drain tube coupling	1
	Drain tube coupling grommet	1
	Gas line grommet	1
	Vent pipe grommet	1
	Combustion--- air pipe grommet	1
	Gas line entry hole filler plug	1
355CAV
	Vent and combustion--- air intake hole filler plug	2
	Power entry hole filler plug	2
	Condensate trap hole filler plug	3
	Combustion--- air pipe perforated disk assembly	1

80 / 27 C

60 / 16 C

A06745

Fig. 4 - Return-Air Temperature

18-IN. MINIMUM

TO BURNERS

A93044

Fig. 5 - Installation in a Garage

The furnace shall be installed so that the electrical components are protected from water.

For accessory installation details, refer to applicable installation literature.

CODES AND STANDARDS

Follow all national and local codes and standards in addition to these instructions. The installation must comply with regulations of the serving gas supplier, local building, heating, plumbing, and other codes. In absence of local codes, the installation must comply with the national codes listed below and all authorities having jurisdiction in Canada.

In the United States and Canada, follow all codes and standards for the following:

Safety

SUS: National Fuel Gas Code (NFGC) NFPA

54-2006/ANSI Z223.1-2006 and the Installation Standards, Warm Air Heating and Air Conditioning Systems ANSI/NFPA 90B

SCANADA: National Standard of Canada, Natural Gas and Propane Installation Code (CAN/CSA-B149.1-05) CSA B149.1-05

General Installation

SUS: NFGC and the NFPA 90B. For copies, contact the National Fire Protection Association Inc., Batterymarch Park, Quincy, MA 02269; or for only the NFGC contact the American Gas Association, 400 N. Capitol, N.W., Washington DC 20001.

SA manufactured (Mobile) home installation must conform with the Manufactured Home Construction and Safety Standard, Title 24 CFR, Part 3280, or when this standard is not applicable, the Standard for Manufactured Home Instllation (Manufactured Home Suites, Communities, and Set-Ups), ANSI/NCS A225.1, and/or CAN/CSA-z240, MH Series Mobile Homes.

SCANADA: CAN/CSA-B149.1-05. For a copy, contact Standard Sales, CSA International, 178 Rexdale Boulevard, Etobicoke (Toronto), Ontario, M9W 1R3, Canada.

Combustion and Ventilation Air

SUS: Section 9.3 of the NFGC, Air for Combustion and Ventilation.

SCANADA: Part 8 of the CAN/CSA-B149.1-05, Venting Systems and Air Supply for Appliances.

Duct Systems

SUS and CANADA: Air Conditioning Contractors Association (ACCA) Manual D, Sheet Metal and Air Conditioning Contractors National Association (SMACNA), or American Society of Heating, Refrigeration, and Air Conditioning Engineers (ASHRAE) 2005 Fundamentals Handbook Chapter 35.

Acoustical Lining and Fibrous Glass Duct

SUS and CANADA: current edition of SMACNA, NFPA 90B as tested by UL Standard 181 for Class I Rigid Air Ducts.

Gas Piping and Gas Pipe Pressure Testing

SUS: NFGC; chapters 5, 6, 7, and 8 and national plumbing codes.

SCANADA: CAN/CSA-B149.1-05 Parts 4, 5, 6, and 9. In the state of Massachusetts:

SThis product must be installed by a licensed plumber or gas fitter.

SWhen flexible connectors are used, the maximum length shall not exceed 36 inches.

SWhen lever type gas shutoffs are used they shall be T-handle type.

6