Minimum Heating Entering Air Temperature

Thermostat

LCTB

When operating on first stage heating, the minimum temperature of air entering the dimpled heat exchanger is 50_F continuous and 45_F intermittent for standard heat exchangers and 40_F continuous and 35_F intermittent for stainless steel heat exchangers. To operate at lower mixed-air temperatures, a field-supplied outdoor-air thermostat must be used to initiate both stages of heat when the temperature is below the minimum required temperature to ensure full fire operation. Wire the

TH1

TH2

W1

OALT

W2

C08442

Fig. 41 - OATL Connections

outdoor-air thermostat OALT (part no. HH22AG106) in series with the second stage gas valve. (See Fig. 41.) Set the outdoor-air thermostat at 35_F for stainless steel heat exchangers or 45_F for standard heat exchangers. This temperature setting will bring on the second stage of heat whenever the ambient temperature is below the thermostat setpoint. Indoor comfort may be compromised when heating is initiated using low entering air temperatures with insufficient heating temperature rise.

Troubleshooting Heating System

Refer to Table 13 and 14 for additional troubleshooting topics.

580J

 

Table 13 – Heating Service Analysis

 

 

 

PROBLEM

CAUSE

REMEDY

 

Misaligned spark electrodes.

Check flame ignition and sensor electrode positioning.

 

Adjust as needed.

 

 

 

 

 

 

 

Check gas line for air, purge as necessary. After purging

 

No gas at main burners.

gas line of air, allow gas to dissipate for at least 5 minutes

 

before attempting to relight unit.

 

 

 

 

 

 

 

Check gas valve.

Burners Will Not Ignite.

Water in gas line.

Drain water and install drip leg to trap water.

 

 

No power to furnace.

Check power supply, fuses, wiring, and circuit breaker.

 

 

No 24 v power supply to control

Check transformer. Transformers with internal overcurrent

 

circuit.

protection require a cool down period before resetting.

 

 

 

 

Miswired or loose connections.

Check all wiring and wire nut connections.

 

 

 

 

Burned---out heat anticipator in

Replace thermostat.

 

thermostat.

 

 

 

 

 

 

Broken thermostat wires.

Run continuity check. Replace wires, if necessary.

 

Dirty air filter.

Clean or replace filter as necessary.

 

 

 

 

Gas input to unit too low.

Check gas pressure at manifold. Clock gas meter for input.

 

If too low, increase manifold pressure, or replace with

 

 

correct orifices.

 

 

 

 

Unit undersized for application.

Replace with proper unit or add additional unit.

Inadequate Heating.

Restricted airflow.

Clean filter, replace filter, or remove any restrictions.

 

 

Blower speed too low.

Use high speed tap, increase fan speed, or install optional

 

 

blower, as suitable for individual units.

 

 

 

 

 

 

Limit switch cycles main burners.

Check rotation of blower, thermostat heat anticipator

 

settings, and temperature rise of unit. Adjust as needed.

 

 

 

 

 

 

Too much outdoor air.

Adjust minimum position.

 

 

 

Check economizer operation.

 

 

 

 

Check all screws around flue outlets and burner

 

Incomplete combustion (lack of

compartment. Tighten as necessary.

 

 

Poor Flame

Cracked heat exchanger.

combustion air) results in:

 

Overfired unit — reduce input, change orifices, or adjust

Characteristics.

Aldehyde odors, CO, sooting

gas line or manifold pressure.

 

flame, or floating flame.

 

 

 

Check vent for restriction. Clean as necessary.

 

 

 

 

Check orifice to burner alignment.

 

 

 

Burners Will Not Turn

Unit is locked into Heating mode

Wait until mandatory one---minute time period has elapsed

Off.

for a one minute minimum.

or reset power to unit.

 

 

 

33

Page 33
Image 33
Bryant 580J*08--14D, F Troubleshooting Heating System, Minimum Heating Entering Air Temperature, Heating Service Analysis

580J*08--14D, F specifications

The Bryant F,580J*08--14D is an advanced heating and cooling system engineered for optimal performance and energy efficiency in residential and commercial applications. This innovative unit is designed to provide exceptional climate control while reducing operational costs, making it an ideal choice for those seeking reliable HVAC solutions.

One of the standout features of the Bryant F,580J*08--14D is its versatile heating and cooling capabilities. This system employs a two-stage compressor, which allows for precise temperature regulation and improved energy efficiency. This dual-stage operation ensures that the system can adapt to varying environmental conditions, providing enhanced comfort without excessive energy use.

The system is equipped with advanced inverter technology, which enables smoother operation and quieter performance. This technology adjusts the compressor speed based on the heating or cooling demand, leading to increased efficiency and reduced energy consumption. Additionally, the inverter system contributes to less noise during operation, creating a serene indoor environment.

The Bryant F,580J*08--14D also features a user-friendly thermostat that allows for easy temperature adjustments and scheduling. This smart thermostat is compatible with mobile devices, enabling users to monitor and control their HVAC system remotely. This feature provides added convenience and ensures that the system is operating efficiently, even when homeowners are away.

Energy efficiency is a hallmark of the Bryant F,580J*08--14D. The system meets and often exceeds ENERGY STAR® standards, making it one of the more eco-friendly options available in the market today. By utilizing energy-saving technologies and innovative designs, the system helps to lower utility bills and reduce the environmental impact.

Durability and reliability are key characteristics of the Bryant F,580J*08--14D. Constructed with high-quality materials and components, this unit is designed to withstand the rigors of changing weather conditions while maintaining consistent performance. Additionally, it comes equipped with a robust warranty, providing peace of mind for users investing in this heating and cooling solution.

In summary, the Bryant F,580J*08--14D is a top-tier HVAC system that boasts advanced technologies, exceptional energy efficiency, and user-friendly features. Its combination of reliable performance and modern conveniences makes it a standout choice for anyone looking to enhance their home's or business's climate control system, providing comfort and savings for years to come.