30
Hub Phone 1020 – Issue 3 – Edition 1 – 05.10.07.07 – 8423 H
To redial a number
From standby:
1. Press to access the redial list.
2. Press or to scroll and display the number you want.
3. Press to dial the number.
Via the menu:
1. Press Menu toaccess the menu.
2. Press or toscroll to
CALLSLISTS
and press OK .
3.
RECEIVEDCALLS
is displayed. Press or
until
DIALLEDCALLS
is displayed and press OK
todisplay the redial list.
4. Press or to scroll and display the number you want.
5. Press to dial the number.
If a name/number match is found in
the phonebook the name will be
displayed instead of the number.
If you have dialled the same number
on morethan one occasion, the call
will appear only once in the redial list.
Each redial number can be up to a
maximum of 20 digits long. Numbers
exceeding 20 digits will not be stored.
Redial names can be up to 12
characters.
When you areat the top of the list,
pressing takes you to the oldest
call and when at the bottom, pressing
takes you to the newest.
If there are no numbers saved in the
redial list
EMPTY
will be displayed.
Using the phone
8423 Hub Phone 1020 Iss.3 [1] 12/10/07 12:25 Page 30