8423 Hub Phone 1020 Iss.3 [1] 12/10/07 12:25 Page 9
Hub Phone 1020 – Issue 3 – Edition 1 – 05.10.07.07 – 8423
|
| Getting started 9 | |
|
|
|
|
5. | On the handset: | Battery performance | |
| Screen prompts on the handset will help guide you through | The charge capacity of rechargeable | |
| batteries will reduce with time as they | ||
| the registration process – it’s easy! | wear out, giving the handset less | |
|
| talk/standby time. | |
• | REGISTER TO HUB will appear on screen. Press OK. | Eventually they will need to be | |
| PRESS AND HOLD HUB BUTTON will then appear on screen. | replaced. Please ensure you use the | |
|
| same mAh rating for battery | |
| Press and hold the wireless association button on the back or | replacement to the batteries that | |
| side of the Hub for 3 seconds (the phone light on the Hub will | were provided when you received | |
| the handset. | ||
| then flash), then you can release the button. | Talk/Standby time | |
| Press OK and place the handset in the charger connected to | ||
• | In ideal conditions, the handset | ||
| the Hub. Once the handset and charger cradle are in the Hub, | batteries should give about 7 hours | |
| talk time or 100 hours standby. | ||
| REGISTERING, PLEASE WAIT appears on screen. | ||
| Note that new batteries do not reach | ||
|
| ||
| DO NOT REMOVE THE HANDSET UNTIL YOU GET A | full capacity until they have been in | |
| normal use for several days. | ||
| CONFIRMATION MESSAGE. | ||
|
|
| |
| If registered successfully you should see: HANDSET REGISTERED. |
|
|
| If unsuccessful then REGISTRATION FAILED will appear and |
|
|
| you will have to try the process again. You will be returned to |
|
|
| the please register screen. |
|
|
| If this fails, then please see the manual registration process |
|
|
| on page 60. |
|
|
