Using additional handsets
Registering an additional Synergy handset with the base station or
ADDITIONAL HANDSETS
As well as your original handset, you can register up to a further 4 additional handsets to your Synergy 2150 base station.
The system allows internal calls between two handsets while a third is making an external call.
Each additional handset you purchase must be registered with the base station.
Please note
Remember to charge the batteries of new handsets for at least 16 hours. When switched on, a new additional handset will display Not SUB. This tells you that the handset is not yet registered with the base station.
To register a handset
At the base station:
Press the PAGE button and Page hold for at least 10 seconds,
until you hear the validation tone, then release the button.
The In Use LED on the base will flash repeatedly. You must register the handset in the next 10 minutes.
At the handset:
Options
Del | Until the display flashes |
| Registration. |
Options |
|
Del | Press to display the available |
| base station names BASE |
If your handset is already registered to another base, then the display shows ✱ next to the base name.
Options When a free base station number is displayed. Display then shows Searching and the base station number.
When the handset has detected the base station signal, it gives a confirmation ring. You are asked to enter the base station PIN.
PIN Enter the
Options The LED will stop flashing (unless there are new messages).
The display shows the normal standby setting when the registration process is completed.
41
