Connecting to a switchboard
SWITCHBOARD
When connecting your Synergy 2150 to a switchboard/PBX, you may need to change the dialling mode from TONE to PULSE.
To change the dialling mode
The dialling mode is set to TONE when the product is supplied.
To change to PULSE.
Options
Del | Until display flashes Base |
| setting. |
Options |
|
To change the network connection
When connected to some switchboards/PBX’s you may encounter higher than normal speech levels. If this is the case you can alter the network setting from PSTN to PBX which would reduce the levels to normal.
Options
Del | Until the display flashes |
| Base setting. |
Options |
|
PIN
Options
Del
Options
Enter the
Until the display flashes Dial mode.
PIN Enter the
Options
Del | Until the display flashes |
| |
| Network. |
Options |
|
Del | Until the display flashes |
| Pulse. |
Options | To confirm setting. |
|
Del | Until PBX is flashing. |
| |
Options | To confirm the setting. |
|
45
